Method of use:

• The surface must be clean, free from grease and dirt. Dampen the substrate generously with water before applying the foam, use the product upside down and the can should be at room temperature
• Before starting work, shake the can vigorously about 30 times, fit the hose
• Fill the cavity from below in a zigzag motion (wall to wall), filling it only partially (approx. 70 %) and leaving space for the foam to expand. One layer of foam should be no thicker than 3 cm fill deeper gaps in layers. Once fully cured, remove excess foam with a sharp knife and protect from UV light e.g. with silicone, plaster

• Sealing when installing wooden and aluminum elements exposed to large fluctuations in temperature and humidity, e.g. in wooden houses and frame structures
• Sealing, soundproofing and filling elements exposed to vibrations and mechanical pressure, i.e. steps of stairs, partition walls
• Thermal insulation of water, sewage and central heating systems
• Filling gaps in thermal insulation when insulating buildings, with particular emphasis on elements susceptible to deflection and deformation

• Available capacity: 750ml
• Working temperature (substrate): +5°C to 30°C
• Working can temperature: +20°C recommended
• Thermal resistance (after curing) from -50°C to +90°C
• Flammability class: B3
• Surface setting time: 5 - 10 minutes
• Time to fully cure: 24 hours
• Capacity: up to 45 liters (depending on temperature and air humidity)

• Keep out of reach of children
• Avoid contact with eyes and skin
• Use in well-ventilated areas
• Do not breathe product vapours
• Do not use naked flames when using the product